Sound field programs
■Editing sound fields parameters
You can enjoy good quality sound with the factory default parameters. Although you do not have to change the initial settings, you can change some of the parameters to better suit the input source or your listening room.
1While listening to a source, press 4AMP and then press QPARAMETER.
2Press 7k / n to select the desired parameter you want to change.
3Press 7l / h to change the parameter value.
Note
You cannot change parameter values when “MEMORY GUARD” in “OPTION MENU” is set to “ON” (see page 60).
y
Initial settings are indicated in bold under each parameter.
For Pop/Rock, Hall, Jazz, Game, TV Sports, Movie Spacious and Movie Dramatic:
DSP level DSP LEVEL
Function: | Adjusts the effect level. |
Choices: | MIN, MID, MAX |
For 2ch Enhancer and 7ch Enhancer
Effect level EFFECT LEVEL
Function: | Adjusts the effect level. |
Choices: | LOW, HIGH |
For Pro Logic II Music and Pro Logic IIx Music:
Panorama PANORAMA
Function: | Sends stereo signals to the surround |
| speakers as well as the front speakers for |
| a wraparound effect. |
Choices: | OFF, ON |
Dimension DIMENSION | |
Function: | Gradually adjusts the sound field either |
| towards the front or towards the rear. |
Control range:
| front), initial setting is STD (standard). |
Center width CT WIDTH | |
Function: | Adjusts the center image from all three |
| front speakers to varying degrees. A |
larger value adjusts the center image towards the front left and right speakers.
Control range: 0 (center channel sound is output only from center speaker) to 7 (center channel sound is output only from front left and right speakers), initial setting is 3.
For Neo:6 Music
Center image C.IMAGE
Function: | Adjusts the front left and right channel |
| output relative to the center channel |
| more or less dominant as necessary. |
Control range: 0.0 to 1.0, initial setting is 0.3.
