SET MENU

Input rename B)INPUT RENAME

Use this feature to change the name of the input source that appears in the OSD and in the front panel display.

2 INPUT MENU

B)INPUT RENAME

DVD -> DVD

[p]/[[]:Position [p]/[p]:Chara.

1 Press one of the input selector buttons (3) or DMULTI CH IN to select the input

source you want to change the name of.

USB

CD MD/CD-R TUNER

or

MULTI CH IN

 

DVD DTV/CBL DVR

V-AUX/DOCK

2Press 4AMP and then press 7l/ hon the remote control to place the “_” (underscore) under the space or the character you want to edit.

3Press 7k / n to select the character you want to use and then press 7l / h to move

to the next space.

Notes

You can use up to 8 characters for each input.

Press 7n to change the character in the following order, or press 7k to go in the reverse order:

A to Z, a space, 0 to 9, a space, a to z, a space, symbols (#, *, –, +, etc.)

4Repeat steps 1 through 3 to rename each input source.

5Press 7ENTER to exit from “INPUT

RENAME”.

Volume trim C)VOLUME TRIM

Use this feature to adjust the output volume of each source. This is useful if you want to balance the level of each input source to avoid sudden changes in volume when switching between input sources.

Choices: CD, MD/CD-R, TUNER, DVD, DTV/CBL, V-AUX, DVR, DOCK, USB,

MULTI CH

Control range: –6.0 to +6.0 dB

Control step: 1.0 dB

Initial setting: 0.0 dB

2 INPUT MENU

C)VOLUME TRIM

DVD

DVD ;;;;;0.0dB

[p]/[[]:Adjust [RETURN]:Exit

Note

You can only adjust the value for DOCK when your iPod is stationed in the Yamaha Universal Dock connected to this unit.

Decoder mode D)DECODER MODE

2 INPUT MENU

D)DECODER MODE

.>AUTO LAST

CD ;;;;AUTO

DVD ;;;;AUTO

DTV/CBL ;;;;AUTO

[p]/[p]:Up/Down [p]/[[]:Select

Decoder select mode

Use this feature to designate the default decoder mode for the input sources connected to the DIGITAL INPUT jacks when you turn on the power of this unit.

Choices: AUTO, LAST

Select “AUTO” if you want this unit to automatically detect the type of input signals and select the appropriate decoder mode.

Select “LAST” if you want this unit to automatically select the last decoder mode used the connected input source.

DTS decoder prioritize setting

Choices: AUTO, DTS

Select “AUTO” if you want this unit to automatically detect input signal types and select the appropriate input mode.

Select “DTS” when you play back a DTS-CD.

58 En

Page 60
Image 60
Yamaha DSP-AX563 owner manual 58 En, Decoder select mode, DTS decoder prioritize setting