Yamaha DSP-AZ2 ■IMPEDANCE SELECTOR switch

SPEAKER SETUP

■IMPEDANCE SELECTOR switch

WARNING

Do not change the IMPEDANCE SELECTOR switch setting while the power of this unit is on, otherwise this unit may be damaged.

If this unit fails to turn on when STANDBY/ON (or SYSTEM POWER) is pressed, the IMPEDANCE SELECTOR switch may not be fully slid to either position. If so, slide the switch to either position fully when this unit is in the standby mode.

Select the upper or lower position according to the impedance of the speakers in your system. Be sure to move this switch only when this unit is in the standby mode.

IMPEDANCE SELECTOR switch

IMPEDANCE SELECTOR

SET BEFORE POWER ON				REAR CENTER : 6ΩMIN./SPEAKER
				CENTER	: 4ΩMIN./SPEAKER
				FRONT	: 6ΩMIN./SPEAKER
				REAR	: 6ΩMIN./SPEAKER
	REAR CENTER :		8ΩMIN./SPEAKER
				MAIN A OR B : 4ΩMIN./SPEAKER
	CENTER	:	8ΩMIN./SPEAKER
					A + B : 8ΩMIN./SPEAKER
	FRONT	:	8ΩMIN./SPEAKER
	REAR	:	8ΩMIN./SPEAKER
	MAIN A OR B :		8ΩMIN./SPEAKER
		A+B : 16ΩMIN./SPEAKER

		VOLTAGE
		SELECTOR
						AC IN
					AC OUTLETS
					SWITCHED
					50W MAX. TOTAL
L
	FRONT
L	EFFECT
	REAR	IMPEDANCE SELECTOR
	(SURROUND)
		SET BEFORE POWER ON			REAR CENTER : 6ΩMIN./SPEAKER
					CENTER	: 4ΩMIN./SPEAKER
					FRONT	: 6ΩMIN./SPEAKER
		REAR CENTER :		8ΩMIN./SPEAKER	REAR	: 6ΩMIN./SPEAKER
L		CENTER	:	8ΩMIN./SPEAKER	MAIN A OR B : 4ΩMIN./SPEAKER
		FRONT	:	8ΩMIN./SPEAKER		A + B : 8ΩMIN./SPEAKER
		REAR	:	8ΩMIN./SPEAKER
		MAIN A OR B :		8ΩMIN./SPEAKER

BA+B : 16ΩMIN./SPEAKER

LMAIN

A

(General and China models)

Switch	Speaker	Impedance level
position
	Rear	The impedance must be 6 Ω or higher.
	Center
	Center	The impedance must be 4 Ω or higher.
	Front	The impedance of each speaker must be 6 Ω or higher.
Upper	Effect
	Rear	The impedance of each speaker must be 6 Ω or higher.
		If you use one set of main speakers, the impedance of
	Main	each speaker must be 4 Ω or higher.
		If you use two sets of main speakers, the impedance of
		each speaker must be 8 Ω or higher.
	Rear	The impedance must be 8 Ω or higher.
	Center
	Center	The impedance must be 8 Ω or higher.
	Front	The impedance of each speaker must be 8 Ω or higher.
Lower	Effect
	Rear	The impedance of each speaker must be 8 Ω or higher.
		If you use one set of main speakers, the impedance of
	Main	each speaker must be 8 Ω or higher.
		If you use two sets of main speakers, the impedance of
		each speaker must be 16 Ω or higher.

14