ADJUSTING THE LEVEL OF THE EFFECT SPEAKERS

You can adjust the output level of each effect speaker (center, left and right rear, rear center, front effect and subwoofer) while listening to a music source.

Adjustment should be made with the remote control.

 

 

A/B/C/D/E PRESET

 

 

 

 

TV INPUT

MUTE

 

 

TV VOL

CH

VOLUME

 

 

 

TV MUTE

STEREO

 

 

 

DISC

EFFECT

 

2

 

 

PARAMETER

1

ON SCREEN

LEVEL

 

 

 

SET MENU

SLEEP

TEST

 

3

 

 

 

 

1 Set PARAMETER/SET

PARAMETER

MENU to PARAMETER.

SET MENU

2 Press LEVEL repeatedly to select the speaker(s) you want to adjust.

Each time you press LEVEL, the selected speaker changes and appears on the front panel display and on the video monitor as follows: center, right rear, rear center, left rear, front effect and subwoofer.

LEVEL

3 Press –/+ to adjust the speaker output level.

•The control range for the center, left and right rear, front effect or rear center speakers is from +10 dB to –10 dB.

•The control range for the subwoofer is from 0 dB to –20 dB.

Notes

•When you adjust the output level with LEVEL, the settings you made with the test tone (“TEST DOLBY SUR.” or “TEST DSP”) will be changed.

•When PARAMETER/SET MENU is set to SET MENU, you cannot adjust the output level by using LEVEL. However, each time you press LEVEL, the current level of each speaker appears on the front panel display and you can check the speaker level.

•When the speaker output modes for “1A CENTER SP”, “1C REAR L/R SP”, “1D REAR CT SP” and “1F FRONT EFCT SP” are set to NONE, and “1E LFE/BASS OUT” to MAIN, the output level of those speakers cannot be adjusted because there is no sound coming from these speakers.

•During playback of the source input through the 6CH INPUT jacks, the level can be adjusted independently for the center, right and left rear, and subwoofer.

Center speaker output level

Right rear speaker output level

Rear center speaker output level

Left rear speaker output level

Front effect speaker output level

Subwoofer output level

Memory back-up

The memory back-up circuit prevents the stored data from being lost even if this unit is in the standby mode. However if the power cord is disconnected from the AC outlet, or the power supply is cut for more than one week, the stored data will be lost. If so, set the output level again.

y

• Once you press LEVEL, you can also select the speaker(s) to

be adjusted by pressing n/k. English

67