REMOTE CONTROL FEATURES

Clearing a Learned Function

You can clear the function learned in a certain programmable button in each area.

1 Press an input selector button, Å or ı to select the source component you want to clear the function.

The selected component name appears in the display window.

 

 

A

B

PHONO

V-AUX

TUNER

MD/TAPE

CD-R

CD

D-TV/LD

CBL/SAT

VCR 1

VCR2/DVR

DVD

2 Press LEARN by using a ballpoint pen or similar object.

“LEARN” and the selected component name appear alternately in the display window.

LEARN

Note

•Complete each of the following steps in 30 seconds. Otherwise the learning mode will be automatically canceled. In this case, press LEARN again.

3 Press and hold CLEAR by using a ballpoint pen or similar object, then press the button for which you want to clear the function for about 3 seconds.

“C:OK” appears in the display window.

 

 

 

 

MACRO

TRANSMIT RE-NAME CLEAR LEARN MACRO

OFF ON

SYSTEM

STANDBY

A

B

PHONO

POWER

V-AUX

TUNER

MD/TAPE

CD-R

CD

D-TV/LD

CBL/SAT

VCR 1

VCR2/DVR

DVD

y

•You can clear other learned functions at this time by holding down CLEAR again and pressing the other buttons for which those learned functions have been programmed.

Note

•“C:NG” appears in the display window if the operation is unsuccessful. In this case, try step 3 again.

4 Press LEARN again to

LEARN

exit.

 

Once you have cleared a learned function for a button, the button reverts to the factory setting.

Clearing a Macro Function

1 Press MACRO to clear a programmed macro by using a ballpoint pen or similar object.

MACRO

Note

•Complete each of the following steps in 30 seconds. Otherwise the learning mode will be automatically canceled. In this case, press MACRO again.

2 Press and hold CLEAR by using a ballpoint pen or similar object, then press the button for which you want to clear the macro for about 3 seconds.

“C:OK” appears in the display window.

 

 

 

 

MACRO

TRANSMIT RE-NAME CLEAR LEARN MACRO

OFF ON

SYSTEM

STANDBY

A

B

PHONO

POWER

 

 

V-AUX

TUNER

MD/TAPE

CD-R

CD

D-TV/LD

CBL/SAT

VCR 1

VCR2/DVR

DVD

y

•You can clear other macros at this time by holding down CLEAR again and pressing the other buttons for which those macros have been programmed.

Note

•“C:NG” appears in the display window if the operation is unsuccessful. In this case, try step 2 again.

3 Press MACRO again to exit from the clearing mode.

Once you have cleared macro for a button, the button reverts to the factory setting.

MACRO

48