8INPUT MODE (initial input mode)
Use this feature to designate the input mode for sources connected to the DIGITAL INPUT jacks when you turn on this unit (see page 30 for details about the input mode).
8 INPUT MODE
AUTO LAST
-/+ : Select
/ : Exit
Choices: AUTO, LAST
Initial setting: AUTO
AUTO
Select this to allow this unit to automatically detect the type of input signal and select the appropriate input mode.
LAST
Select this to set this unit to automatically select the last input mode used for that source.
Note
•Even if LAST is selected, the last setting for the EX/ES button will not be recalled.
SET MENU
10 LFE LEVEL
This setting is effective only when this unit decodes Dolby Digital or DTS signals.
Use this feature to adjust the output level of the LFE
Control range (dB):
HEADPHONE
Initial setting: 0 dB for both SPEAKER and
HEADPHONE
1 Press k / n to select the item to be adjusted.
10 LFE LEVEL
≥SPEAKER ……………… 0dB HEADPHONE ………… 0dB
2 Press
10 LFE LEVEL
≥SPEAKER ………… - 11dB HEADPHONE ………… 0dB
Use this feature to initialize the parameters for each DSP program within a DSP program group. When you initialize a DSP program group, all of the parameter values within that group revert to their initial settings.
Press the corresponding numeric button for the DSP program that you want to initialize.
The asterisk (*) next to the program number means that the parameter values have been changed.
Note
•Adjust the LFE level according to the capacity of your subwoofer or headphones.
OPERATION | ADVANCED |
9 PARAM. INI
1 2 3 *4
*5 6 7 8
9* 1 0 1 1 Press No . Key
Notes
•You cannot initialize the individual DSP programs within a group separately.
•When “14 MEMORY GUARD” is set to ON (see page 66), you cannot initialize any program groups.
•Once you initialize a DSP program group, you cannot automatically revert to the previous parameter settings.
English
63