Yamaha DSP-AZ2 13DISPLAY SET, 13 DISPLAY SET, ■DIMMER, ■GRAY BACK, 12 SP DELAY, 12 SP DELAY, 12 SP DELAY, ■Setting by “msec”, ■Setting by “feet”, ■Setting by “meters”

■Setting by “msec”

Control range:	0 to 5.0 ms (for center), 0 to 30.0 ms
	(for rear center)
Initial settings:	0 ms (for center), 3.0 ms (for rear
	center)

12 SP DELAY

≥UNIT …………………… msec CENTER …………… 0 . 0ms REAR CT ………… 3 . 0ms

■Setting by “meters”

Control range:	0.15 to 30.00 m (for main L/R,
	center, rear L/R, rear center)
Initial settings:	3.00 m (for main L/R, center, rear L/
	R), 2.10 m (for rear center)

12 SP DELAY

≥UNIT ……………… meters MAIN L/R ……… 3 . 00m CENTER …………… 3 . 00m REAR L/R ……… 3 . 00m REAR CT ………… 2 . 10m

SET MENU

13DISPLAY SET

13 DISPLAY SET

≥D I M M E R … … … … … … … … … 0 O S D S H I F T … … … … … … 0 G R A Y B A C K … … … A U T O V CONV .……………… OFF

■DIMMER

You can adjust the brightness of the front panel display.

Control range: –4 to 0

Initial setting: 0

■OSD SHIFT (OSD off-set position)

This setting is used to adjust the vertical position of the OSD.

Control range: +5 (downward) to –5 (upward)

Initial setting: 0

Press + to lower the position of the OSD. Press – to raise the position of the OSD.

■Setting by “feet”

Control range:	0.5 to 100 ft (for main L/R, center,
	rear L/R, rear center)
Initial settings:	10.0 ft (for main L/R, center, rear L/
	R), 7.0 ft (for rear center)

12 SP DELAY

≥UNIT …………………… feet MAIN L/R …… 10 . 0ft CENTER ………… 10 . 0ft REAR L/R …… 10 . 0ft REAR CT ………… 7 . 0ft

■GRAY BACK

Selecting AUTO for the on-screen display setting displays a gray background when there’s no video signal input. Nothing is displayed on the screen including the on- screen display if OFF is selected.

Choices: AUTO, OFF

Initial setting: AUTO

Note

•If “GRAY BACK” is set to OFF, no information will be displayed on the screen when video signals are not being input.

OPERATION ADVANCED

Note

•No delay will be set if the same distance is set for the main L/R and center, or the rear L/R and rear center with “meters” or “feet” selected.

■V CONV. (Video conversion) (Europe and U.K. models only)

Use this feature to turn on/off the function to convert composite signals to S-video signals to output through the S-video jack when no S-video signals are input.

Choices: ON, OFF

Initial setting: OFF

OFF

Select this not to convert composite signals to S-video signals.

ON

Select this to convert composite signals to S-video signals.

English

65