CONNECTING SPEAKERS
| Main speakers |
Left | Subwoofer system |
Right |
Amplifier | (Europe model) |
(for driving main speakers) |
MAIN | CENTER | SINGLE:4ΩMIN./SPEAKER |
|
|
|
| REAR | DUAL:2ΩMIN./SPEAKER |
|
|
|
| 6ΩMIN./SPEAKER |
|
|
| |
| CENTER | SINGLE:8ΩMIN./SPEAKER |
|
|
|
| REAR | DUAL:4ΩMIN./SPEAKER |
|
|
|
| 8ΩMIN./SPEAKER |
|
|
| |
| IMPEDANCE SELECTOR |
|
|
| |
| CAUTION SEE INSTRUCTION MANUAL FOR CORRECT SETTING. |
|
| ||
| REAR |
|
|
|
|
|
|
| REAR | CENTER | SUB |
|
|
| WOOFER | ||
| CENTER |
|
|
|
|
|
| DUAL | DUAL |
|
|
|
|
|
|
| l |
|
| SINGLE | (SURROUND) | DUAL | DUAL |
OUTPUT |
| SPEAKERS |
| OUTPUT |
|
l0dB 0dB
MAIN
LEVEL
RightLeft
Rear speakers | Center speaker |
How to Connect to the REAR and CENTER SPEAKERS terminals
Connect the SPEAKERS terminals to your speakers with wire of the proper gauge, cut as short as possible. If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is the + and – markings are observed. If these wires are reversed, the sound will be unnatural and lack bass.
Caution
Do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit. This could damage this unit and/or speakers.
Note
Use speakers with the specified impedance shown on the rear of this unit.
Red: positive (+)
Black: negative
2
1
3
<General model only>
Banana Plug connections are also possible. Simply insert the
Banana Plug connector into the corresponding terminal.
➀Unscrew the knob.
➁Insert the bare wire. [Remove approx. 5mm (1/4”) insulation from the speaker wires.]
➂Tighten the knob and secure the wire.
12