5MAIN LEVEL switch <U.K. and Europe models only> Normally set to “0 dB”. If desired, you can decrease the output level at the MAIN OUTPUT terminals by 10 dB by setting this switch to “–10 dB”.

6AC OUTLET (UNSWITCHED)

The power cord of any audio/video unit can be connected to this outlet.

The power to this outlet is not controlled by this unit’s POWER switch. This outlet will supply power to the connected unit even if this unit is turned off.

The maximum power that can be connected to this outlet is 100 watts.

7AC power cord

After all connections are completed, connect this into a wall AC outlet.

8AUDIO SIGNAL connection terminals (for audio source equipment)

Connect the inputs and/or outputs of your audio equipment.

9AUDIO/VIDEO SIGNAL connection terminals (for video source equipment)

Connect the audio and video inputs and/or outputs of your video equipment.

0REAR SPEAKERS terminals

When using the built-in rear-channel amplifier, connect the rear speakers here.

ACENTER SPEAKERS terminals

When using the built-in center-channel amplifier, connect one or two center speakers here.

BREAR (SURROUND) OUTPUT terminals

These terminals are for rear channel line output. There is no connection to these terminals when you use the built-in amplifier.

However, if you drive rear speakers with an external stereo power amplifier, connect the input terminals of the external amplifier (MAIN IN or AUX terminals of a power amplifier or an integrated amplifier) to these terminals.

Note

Output level of signals from the MAIN, REAR, CENTER and SUBWOOFER OUTPUT terminals are adjusted by the use of VOLUME control on the front panel or VOLUME keys on the remote control transmitter.

CCENTER OUTPUT terminals

These terminals are for center channel line output. There is no connection to these terminals when you use the built-in amplifier.

However, if you drive a center speaker with an external power amplifier, connect the input terminal of the external amplifier driving a center speaker to one of these terminals.

If you drive two center speakers with external amplifiers, connect the input terminal of the external amplifier driving another center speaker to the other terminal.

DSUBWOOFER OUTPUT terminals

You may wish to add a subwoofer to reinforce the bass frequencies.

These terminals are line level outputs for connecting with the amplifier(s) driving subwoofer(s).

When the input signals to this unit are in normal 2-channel stereo, these terminals output only frequencies below 150 Hz (200 Hz for General model only) from the main and center channels. When signals decoded with the Dolby Digital (AC-3) are input to this unit and are selected as the input source, these terminals output signals from the subwoofer channel.

English

9