OTHER CONNECTIONS

TV IN terminal <E>

To listen to TV channels through this DVD receiver, use the audio cables (white/red, not supplied) to connect the TV IN jacks to the corresponding audio out jacks on your TV.

Notes

–When using AV MONITOR OUT terminal to listen to the TV channels, set the DVD receiver’s component setting to “RGB” (see page 25).

–When using TV IN terminal, set the DVD receiver’s component setting to“YUV” (see page 25).

■Connecting the FM/AM antennas

AM loop antenna

1

FM wire antenna

2

FM

GND

AM

ANT

 

ANT

TO SUBWOOFER

IN SYSTEM

CONNECTOR

Ground (GND terminal)

For minimum interference, connect the antenna GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth.

1Connect the supplied AM loop antenna to the AM ANT terminal. Place the AM loop antenna on a shelf or attach it to a stand or wall.

2Connect the supplied FM wire antenna to the FM ANT terminal. Extend the FM wire antenna and fix its ends to the wall.

For better FM stereo reception, connect an external FM antenna (not supplied).

Notes

–Adjust the position of the antennas for optimal reception.

–Position the antennas as far as possible from your TV, VCR or other sources of radiation to prevent unwanted interference.

20