SYSTEM CONNECTIONS

■Connecting the DVD receiver and

the subwoofer

Connect the subwoofer to the DVD receiver using the system control cable. Attach one end to the subwoofer and the other to the SYSTEM CONNECTOR terminal at the rear of the DVD receiver.

SYSTEM

CONNECTOR

SYSTEM

CONNECTOR

NX-SW301

SYSTEM

CONNECTOR

NX-SW300

SYSTEM

CONNECTOR

Notes

–After inserting the system control cable, be sure to tighten the cable screws.

–Ensure that the speaker cables are correctly connected. Improper connections may damage the system due to a short-circuit.

–When connecting the speakers, fix the speaker cables in place so that cables do not loosen. If your foot or hand accidentally gets caught on a loose speaker cable, the speaker may fall.

–To prevent unwanted noise, do not place the subwoofer too close to the DVD receiver, AC power adaptor, TV or other sources of radiation.

18