■Placing the front/surround speakers

Attaching to a wall

You can attach the speakers to a wall using commercially available screws (Diameter: 3.5 to 4 mm, Length: 25 mm or more). Each speaker requires two screws.

NX-S301

40 mm

Screws (3.5 to 4 mm dia., commercially available)

20 mm or more 5 mm

–+

1Install two screws in the wall where you want to place the speaker.

2Hang the speaker on the screws using the holes in the back of the speaker.

Notes

–To attach a speaker to a wall using screws, the wall must be firm. Do not attach a speaker to a wall that is made of weak materials such as plaster or veneered woods. Doing so may cause the speaker to fall.

–When connectiong the speakers, fix the speaker cables in place so that cables do not loosen. If your foot or hand accidentally gets caught on a loose speaker cable, the speaker may fall.

–After attaching each speaker, check that the speaker is fixed securely. YAMAHA will bear no reponsibility for any accidents caused by improper installations.

Hanging on a wall (NX-S301)

You can hang the speakers on a wall using a commercially available bracket and screws (Diameter: 6 mm). Attach a bracket firmly to the rear of the speakers using screws.

Then mount a screw on the wall where the speaker is to be hung and hook the speaker securely onto the mounted screws.

Note

Do not use screw threads neasured in inches for this installation. Use metric screw threads only.

CONNECTIONS

 

Attaching the base

 

Attach the base to the bottom of the front/surround

 

speakers (NX-S302) with the supplied base mounting

2

screws as shown below.

Base

PREPARATION

mounting

 

screws

 

Base

 

Washer

 

NX-S302

Note

Placing the speakers (NX-S302) on the places such as hard wooden floor may scratch the surface of the floor.

■Placing the subwoofer

Attach the non-skid pads to the bottom of the subwoofer (NX-SW301), and then place the subwoofer on a level hard floor.

Peel off the seal

Note

Using non-skid pads prevents the subwoofer from sliding when it vibrates, and ensure quality sound production.

English

13