Yamaha DVX-S301, DVX-S302, DVX-S303 ■Video setup menu, TV type, TV display, Progressive function, Picture settings

■Video setup menu

1In DVD/CD mode, press SET UP.

2Press / to select [VIDEO SETUP PAGE] icon.

3Press ENTER (OK) to confirm.

VIDEO SETUP PAGE

TV TYPE

TV DISPLAY

PROGRESSIVE

PICTURE SETTING

COMPONENT

BLACK LEVEL

CLOSED CAPTION

TV type

This menu contains the options for selecting the color system that matches the connected TV. For details, see “Selecting the TV type” on page 24.

TV display

This menu contains the options for matching the aspect ratio of the receiver to the connected TV. For details, see “Setting the TV display” on page 25.

Progressive function

The progressive scan display present 60 complete frames per seconds, rather than 30 frames per second of interlaced scanning (ordinary normal TV system). With nearly double the number of lines, progressive scan offers higher picture resolution and eliminates bothersome motion artifacts those jagged edge on moving objects.

Note

Before enabling the progressive scan function, you must ensure:

1Turn on your TV progressive scan function (refer to your TV owner’s manual).

2You have connected the DVD receiver to your TV using Y PB PR (see “Connecting a TV” on page 19).

DVD SETUP MENU OPTIONS

1In [VIDEO SETUP PAGE], press / to highlight [PROGRESSIVE], then press .

OFF

Select this to disable progressive scan function.

ON

Select this to enable progressive scan function.

2Press / to select a setting and press ENTER

(OK) to confirm.

→ Follow the instructions shown on the TV to

confirm the selection (if any).
– If a blank/distorted TV screen appears, wait for 15	5
seconds for auto recovery to activate.

		Note		SCREEN-ON
	If you are changing the setting to OFF by using the remote
	control, follow the procedure below.
1		Open the disc tray.		MENU
2		Press	, then press ANGLE.

Picture settings

Note

This receiver comes with three predefined sets of picture color settings and one personal setting that you can define yourself.

1 In [VIDEO SETUP PAGE], press / to highlight [PICTURE SETTING], then press .

STANDARD

Select this for the standard picture setting.

BRIGHT

Select this to make the TV picture brighter.

SOFT

Select this to make the TV picture softer.

PERSONAL

Select this to personalize your picture color by adjusting the brightness, contrast, tint and color (saturation).

2 Press / to select a setting and press ENTER (OK) to confirm.

3If you selected [PERSONAL], proceed to step 4. → The [PERSONAL PICTURE SETUP] menu appears.

English

39