INTRODUCTION

Thank you for purchasing this unit. This Owner’s Manual explains the basic operation of this unit.

Notes about discs

–This receiver is designed for use with the following discs: Super Audio CD (Super Audio CD), DVD- Video, Video CD, Super Video CD, Audio CD, CD- R, CD-RW, DVD-Audio, DVD+RW, DVD+R, DVD-R, DVD-RW and DVD-RW (VR format).

This receiver can play:

–MP3 and picture (Kodak, JPEG) files recorded on CD-R(W).

–JPEG/ISO 9660 format

–Maximum 30 character display

–DivX® disc on CD-R[W]/DVD+R[W]/ DVD-R[W](3.11, 4.x and 5.x)

Notes

–CD-R, CD-RW and DVD-RW (VR format) cannot be played unless finalized.

–Some discs cannot be played depending on the recording conditions, such as the PC environment and application software. The characteristics and condition of some discs; materials, scratches, curvature, etc, may result in playback failure.

–Be sure to use only CD-R and CD-RW discs made by reliable manufacturers.

–Do not use any non-standard shaped discs (heart- shaped, etc.).

–Do not use discs with tape, seals, or paste on their surface. Doing so may damage this receiver.

–Do not use discs affixed with labels printed by a commercially available label printer.

Cleaning discs

–When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a circlar motion.

–Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analog records.

Avoid high temperatures, moisture, water and dust

–Do not expose the system, batteries or discs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight). Always keep

the disc tray closed to avoid getting dust on the lens.

Avoid condensation problem

–The lens may cloud over when the receiver is suddenly moved from cold to warm surroundings,

making it impossible to play a disc. Leave the receiver in the warm environment until the moisture evaporates.

Disc care

–Write only on the printed side of a CD-R/ CD-RW and only with a soft felt-tipped pen.

–Handle the disc by its edge; do not touch the

surface.

Cabinet care

–Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing

alcohol, spirits, ammonia, or abrasives.

Choosing a suitable location

– Place the receiver on a flat, hard, and stable surface.

2