DVD SETUP MENU OPTIONS
■Audio setup menu
1In DVD/CD mode, press SET UP.
2Press 
/ 
to select [AUDIO SETUP PAGE].
3Press ENTER (OK) to confirm.
AUDIO SETUP PAGE
SPEAKER SETUP
CD UPSAMPLING
NIGHT MODE
LIP SYNC
Speaker setup
This menu contains setup options for audio output so that you can set your speakers to reproduce high quality surround sound. For details, see “Setting speaker channels” on page 27.
CD upsampling
This feature allows you to convert your music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality.
Note
If you have activated the upsampling function, the receiver will automatically switch to stereo mode.
1In [AUDIO SETUP PAGE], press 
/ 
to highlight [CD UPSAMPLING], then press 
.
OFF
Select this to disable
88.2 kHz (X2)
Select this to convert the sampling rate of CDs to twice that of the original.
2Press 
/ 
to select a setting and press ENTER (OK) to confirm.
Note
If you select
Night mode
When night mode is activated, high volume output is softened and low volume output raised to an audible level (for DVD playback only). This is useful for watching your favorite action movie without disturbing others at night.
1In [AUDIO SETUP PAGE], press 
/ 
to highlight [NIGHT MODE], then press 
.
ON
Playback continues at a more even volume and “NIGHT ON” appears in the display panel.
OFF
Playback continues with the full dynamic range of surround sound, and “NIGHT OFF” appears in the display panel.
2Press 
/ 
to select a setting and press ENTER (OK) to confirm.
Note
This function is only available for Dolby Digital.
Lip synchronization
This feature allows you to delay the sound output from the center speaker in order to synchronize it with the video image. This may be necessary when using certain LCD monitors or projectors.
Choices: 0 to 200 ms
1In [AUDIO SETUP PAGE], press 
/ 
to highlight [LIP SYNC], then press 
.
2Press 
/ 
to adjust the delay time (between 0 ms and 200 ms) and press ENTER (OK) to confirm.
38