■Connecting the speaker cables

Connect the speaker cable with the color band to the plus (Red (+)) connector on the front/center/surround speakers and with the white line to the minus (Black (–)) connector.

Color band

Lever

(Black)Lever

(Red)

Press the lever down, then insert the cable into the hole and release the lever.

Color

Leverband (Red)

Lever (Black)

SYSTEM CONNECTIONS

Before connecting the speaker cables to the subwoofer

 

(NX-SW300), remove the cable plugs from supplied

 

speaker cables.

 

Press and hold the release button and remove the supplied

2

speaker cable from the cable plug.

 

 

Release button

PREPARATION

 

 

Note

 

 

Be sure to twist the cable core firmly in a clockwise

 

direction. Twisting loosely may cause a short.

 

Good

No Good

 

 

 

 

 

 

 

 

 

 

 

 

FRONT R (Red), CENTER (Green), FRONT L (White):SURROUND R (Gray), SURROUND L (Blue):

Press the lever down, then insert the cable into the hole and release the lever.

■Connecting the subwoofer

Insert the cable plug of the speaker cable into the speaker jack of the same color until you hear it click into place.

Lever

color band

SPEAKERS

•FRONT R (Red), CENTER (Green), FRONT L (White): Insert the cable plug facing the tub upwards.

•SURROUND R (Gray), SURROUND L (Blue):

Insert the cable plug facing the tub downwards.

Red

Green

Tab

White

Blue

Gray

Tab

NX-SW301

FRONT CENTER SURROUND

Lift up the lever, then insert

 

the cable into the hole and

NX-SW300

replace the lever.

Note

Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug or speaker jack.

English

17