GETTING STARTED

■Setting a TV

Note

Make sure you have completed all the necessary connections (see “Connecting a TV” on page 19).

1Press DVD/CD.

→“DVD/CD” appears in the display panel.

2Turn on the TV and set to the correct video-in channel.

→You should see the background screen on the TV.

–Usually this channel is between the lowest and highest channels and may be called FRONT, A/V IN or VIDEO. See your TV manual for more details.

–Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the Video In channel.

–Or, the TV remote control may have a button or switch that chooses different video modes.

Selecting the TV type

In order for a DVD to play on this DVD receiver, the color system of the DVD, the TV and the DVD receiver should match. Before changing the TV system, determine the color system of your TV.

1In DVD/CD mode, press SET UP.

2Press repeatedly to select [VIDEO SETUP PAGE].

3Press / to highlight [TV TYPE], then press

.

VIDEO SETUP PAGE

TV TYPE

PAL

TV DISPLAY

NTSC

PROGRESSIVE

MULTI

PICTURE SETTING

COMPONENT

4Press / to highlight one of the options below: PAL – Select this if the connected TV has the PAL color system. It will change the video signal of an NTSC disc and output it to PAL format.

NTSC – Select this if the connected TV has the NTSC color system. It will change the video signal of a PAL disc and output it to NTSC format.

MULTI – Select this if the connected TV is compatible with both NTSC and PAL (multisystem). The output format will be in accordance with the video signal of the disc.

5Select a setting and press ENTER (OK).

–Follow the instructions shown on the TV to confirm the selection (if any).

–If a blank/distorted TV screen appears, wait for 15 seconds for auto recovery to activate.

Note

When you are selecting color system by using the remote control, follow the procedure below.

1Open the disc tray.

2Press , then press AUDIO.

→If the default setting of the color system is NTSC, it will be changed to PAL.

→If the default setting of the color system is PAL, it will be changed to NTSC.

24