PLAYBACK

When you select the SUR. STANDARD program:

PRO LOGIC

Dolby Pro Logic processing for any sources.

PLII Movie

Dolby Pro Logic II processing for movie software.

PLII Music

Dolby Pro Logic II processing for music software.

PLII Game

Dolby Pro Logic II processing for game software.

PLIIx Movie

Dolby Pro Logic IIx processing for movie software.

PLIIx Music

Dolby Pro Logic IIx processing for music software.

PLIIx Game

Dolby Pro Logic IIx processing for game software.

Neo:6 Cinema

DTS processing for movie software.

Neo:6 Music

DTS processing for music software.

When you select the SUR. ENHANCED or MOVIE THEATER program:

PRO LOGIC

Dolby Pro Logic processing for any sources.

PLII Movie

Dolby Pro Logic II processing for movie software.

PLIIx Movie

Dolby Pro Logic IIx processing for movie software.

Neo:6 Cinema

DTS processing for movie software.

y

You can also select a decoder by pressing j / i on the remote control when the decoder type is displayed in the short message display.

Note

The Pro Logic IIx decoder is not available when “SUR. B L/R SP” is set to NONE (see pages 64).

■Listening to high fidelity stereo sound

(PURE DIRECT)

PURE DIRECT allows you to bypass this unit’s decoders and DSP processors, and turn off the video circuitry and front panel display to enjoy pure high fidelity sound from analog and PCM sources.

Press PURE DIRECT (or press AMP to select the AMP mode, then press PURE DIRECT on the remote control) to activate pure direct.

The indicator around the front panel button lights up.

PURE DIRECT

AMP

PURE DIRECT

 

 

or

8

Front panel

 

Remote control

y

The front panel display switches on momentarily when an operation is performed.

To cancel, press PURE DIRECT again.

The indicator around the front panel button goes out and the previous settings are restored.

Notes

•To avoid unexpected noise, do not play DTS-encoded CDs in this mode.

•When a multi-channel signal (Dolby Digital or DTS) is input, this unit automatically switches to the corresponding analog input.

•No sound will be output from the subwoofer.

•The following operations are not possible during PURE DIRECT operation:

–switching the sound field program

–displaying the OSD

–adjusting SET MENU parameters

–all video functions (video conversion etc.)

•PURE DIRECT is automatically cancelled whenever this unit is set to the standby mode.

34