■Parameter initialization C)PARAM. INI
Use this feature to initialize the parameters for each sound field program within a sound field program group. When you initialize a sound field program group, all of the parameter values within that group revert to their initial settings.
Press the corresponding numeric button for the sound field program that you want to initialize.
Choices:
An asterisk (*) appears to the left of program names that have been changed from their initial settings.
Choices: STEREO, MUSIC, ENTERTAINMENT, MOVIE, STANDAND
C)PARAM.INI
STEREO *MUSIC
ENTERTAINMENT MOVIE THEATER
*STANDARD Press DSP key
Notes
•You cannot automatically revert to the previous parameter settings once you initialize a sound field program group.
•You cannot separately initialize individual sound field programs.
•You cannot initialize any program groups when “MEMORY GUARD” is set to ON.
■Zone set D)MULTI ZONE SET
Use to specify the location of speakers connected to the SPEAKERS B terminals.
D)MULTI ZONESET
.SPB;;;;;;;;FRONT
[<]/[>]:Select
[ENTER]:Return
Speaker B setting SP B
Use this feature to select the location of the front speakers connected to the SPEAKERS B terminals.
Choices: FRONT, ZONE B
•Select FRONT to turn on/off SPEAKERS A and B when the speakers connected to the SPEAKERS B terminals are set in the main room.
•Select ZONE B if the speakers connected to the SPEAKERS B terminals are set in another room. If SPEAKERS A is turned OFF and SPEAKERS B is turned ON, all the speakers including the subwoofer in the main room are muted and the unit outputs sound from SPEAKERS B only.
SET MENU
Notes
•If you connect headphones to the PHONES jack on the unit when “SP B” is set to ZONE B, the sound is output from both headphones and SPEAKERS B.
•If a DSP program is selected when “SP B” is set to ZONE B, the unit automatically enters the Virtual CINEMA DSP mode.
■XM Radio setting E)XM RADIO SET
XM information display time XM DISPLAY
Use to set the time for displaying XM information in the
Choices: OFF, 10s, 30s, ON
y
When “XM DISPLAY” in the SET MENU is set to “ON”, pressing DISPLAY shows XM information until you select another input source (see page 30).
XM Radio antenna XM ANT.
Use to check the current reception level for the XM Connect and Play digital antenna accessory connected to this unit. For the best reception, orient the XM Connect and Play digital antenna accessory so that a value of XX% or more is displayed here.
Range: NONE, 0 to 100%
Note
“NONE” is displayed if the XM Connect and Play digital antenna accessory is not connected to this unit. If this happens, check the antenna connections (see page 44).
E)XM RADIO SET
XM DISPLAY;;;10S
XM ANTENNA;;;75%
[<]/[>]:Select
[ENTER]:Return
OPERATION | ADVANCED |
|
|
71