Yamaha HTR-5860 3 OPTION MENU, ■Display settings A)DISPLAY SET, Memory guard, OFF, AUTO, Dimmer DIMMER, OSD shift OSD SHIFT, Gray back GRAY BACK, Component OSD CMPNT OSD

SET MENU

3 OPTION MENU

Use to adjust the optional system parameters.

3
OPTION
MENU

.
A)DISPLAY
SET B)MEMORY
GUARD C)PARAM.
INI D)MULTI ZONE
SET

[
]/[
]:Up/Down

[ENTER]:Enter

■Display settings A)DISPLAY SET

A)DISPLAY
SET

.
DIMMER;;;;;;;;;0

VIDEO
CONV.;;;ON OSD SHIFT;;;;;;0

GRAY
BACK;;;AUTO

CMPNT
OSD;;;;;ONXM INFO

[
]/[
]:Up/Down

[<]/[>]:sELECT

Dimmer DIMMER

Use to adjust the brightness of the front panel display. Choices: –4 to 0

Video conversion VIDEO CONV.

Use this feature to turn on/off conversion of composite (VIDEO) signals to both S-video and component signals. This allows you to output converted video signals from the S VIDEO or COMPONENT VIDEO jacks when no S-video or component signals are input. This feature also converts S-Video signals to component signals when no component signals are input.

Choices: ON, OFF

•Select OFF not to convert any signals (except S-video signals to composite signals).

•Select ON to convert composite signals to S-video and component signals, and to convert S-video signals to component signals.

•Regardless of the setting, S-video signals are always converted to composite signals.

Notes

•Converted video signals are only output to the MONITOR OUT jacks. When recording you must make the same type of video connections (i.e., S-video) between each component.

•When converting composite video or S-Video signals from a VCR to component video signals, the picture quality may suffer depending on your VCR.

OSD shift OSD SHIFT

Use to adjust the vertical position of the OSD. Choices: +5 (downward) to –5 (upward)

•Press + to lower the position of the OSD.

•Press – to raise the position of the OSD.

Gray back GRAY BACK

Selecting AUTO for the on-screen display setting displays a gray background when there’s no video signal input. Nothing is displayed if OFF is selected.

Choices: AUTO, OFF

Notes

•When only the component video signals are input, the OSD is not displayed if GRAY BACK is set to OFF. To display the OSD with component video signal input, set GRAY BACK to AUTO while the OSD mode (see page 58) is set to “Full display”.

•When video signals are not being input, set GRAY BACK to AUTO to display the OSD.

Component OSD CMPNT OSD

Use this feature to turn on/off OSD output to the COMPONENT VIDEO MONITOR OUT jacks when using the SET MENU.

Choices: ON, OFF

•Select ON to output the OSD signals from COMPONENT VIDEO MONITOR OUT jacks.

•Select OFF if you do not want to output the OSD signals from COMPONENT VIDEO MONITOR OUT jacks.

Note

SET MENU functions even when OFF is selected.

■Memory guard B)MEMORY GUARD

Use this feature to prevent accidental changes to DSP program parameter values and other system settings. Choices: ON, OFF

B)MEMORY
GUARD

)OFF


ON

[<]/[>]:Select

[ENTER]:Return

Select ON to protect:

•DSP program parameters

•All SET MENU items

•All speaker levels

•The on-screen display (OSD) mode

Note

When MEMORY GUARD is set to ON, you cannot select any other SET MENU items.

70