ADVANCED OPERATIONS
Selecting the OSD mode |
| Using the sleep timer |
You can display this unit’s operating information on a video monitor. If you display the SET MENU and sound field program parameter settings on a monitor, it is much easier to see the available options and parameters than it is by reading this information on the front panel display.
1Turn on the video monitor connected to this unit.
2Press ON SCREEN repeatedly to change the OSD mode.
The OSD mode changes in the
DISPLAY
following order: full display, short ON SCREEN display, and display off.
Full display
Always shows the sound field program parameter settings as well as the contents of the front panel display.
Short display
Briefly shows the contents of the front panel display at the bottom of the screen each time you operate this unit.
Display off
Only operations performed using ON SCREEN are displayed. The OSD is displayed when using SET MENU even if the OSD mode is set to “Display off”.
P04 MOVIE THEATER
.General
DSPLEVEL;;;;0dB P.INIT.DLY;;15ms P.ROOMSIZE;;1.0 S.INIT.DLY;;20ms S.ROOMSIZE;;1.0
P04MOVIETHEATER
General
Full display | Short display |
Notes
•The OSD signal is not output to the REC OUT jack, and will not be recorded.
•You can set the OSD to turn on (gray background) or off when a video source is not being reproduced (or the source component is turned off) by using DISPLAY SET (see page 70).
•When only the component video signals are input, the OSD is not displayed if the OSD mode is set to “Short display”. To display the OSD with component video signal input, set the OSD mode to “Full display” while GRAY BACK in DISPLAY SET (see page 70) is set to AUTO.
Use this feature to automatically set this unit in the standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer also automatically turns off any external components connected to AC OUTLET(S).
■Setting the sleep timer
CODE SET | TRANSMIT |
|
| |
|
|
| SYSTEM |
|
POWER | POWER | STANDBY | POWER |
|
TV | AV |
|
|
|
CD | TUNER | SLEEP | 2 | |
DVD | DTV/CBL | MULTI CH IN | ||
VCR 1 | DVR/VCR2 |
| AMP |
|
TV VOL | TV CH | VOLUME |
| |
TV MUTE | TV INPUT |
|
|
|
1Select a source and start playback on the source component.
2Press SLEEP repeatedly to set
the amount of time. | SLEEP |
|
Each time you press SLEEP, the front panel display changes as shown below. The SLEEP indicator flashes while switching the amount of time for the sleep timer.
SLEEP 120min | SLEEP 90min |
SLEEP OFF SLEEP 30min SLEEP 60min
DVR/VCR2 VCR1 | DTV/CBL | DVD | CD | PHONO |
SP |
| TUNED |
| VOLUME |
HiFi DSP |
|
| ||
A | SLEEP | dB | ||
|
|
|
| |
L R
The SLEEP indicator lights up in the front panel display, and the display returns to the selected sound field program.
SLEEP indicator
|
|
|
|
|
DVR/VCR2 VCR1 | DVD |
| CD | PHONO |
SP | TUNED |
|
| VOLUME |
|
|
|
| |
A |
| SLEEP | dB | |
TV Sports | L R |
58