Yamaha HTR-5860 ■ADVANCED SETUP menu items, MIN, ID1, SP IMP, CANCEL, Speaker, ADVANCED, OPERATION, Remote REMOTE, Impedance level, Factory presets PRESET

■ADVANCED SETUP menu items

Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.

Speaker impedance SP IMP.

Use to switch the speaker impedance for this unit. Choices: 8 Ω MIN, 4 Ω MIN

•Select 8 Ω MIN to set the speaker impedance to 8 Ω .

•Select 4 Ω MIN to set the speaker impedance to 4 Ω .

SP IMP.	Speaker	Impedance level
		If you use one set (A or B),
		the impedance of each
		speaker must be 4 Ω or
	Front	higher.
		If you use two sets (A and
4 Ω ΜΙΝ		B), the impedance of each
		speaker must be 8 Ω or
		higher.
	Center	The impedance of each
	Surround	speaker must be 6 Ω or
		higher.
	Surround back
		If you use one set (A or B),
		the impedance of each
		speaker must be 8 Ω or
	Front	higher.
		If you use two sets (A and
8 Ω ΜΙΝ		B), the impedance of each
		speaker must be 16 Ω or
		higher.*
	Center	The impedance of each
	Surround	speaker must be 8 Ω or
		higher.
	Surround back

*The Canada model cannot use two separate speaker systems (A and B) simultaneously when SP IMP. is set to the 8 Ω MIN

position.

Factory presets PRESET

Use to reset all parameters to the factory presets (see page 90).

Choices: CANCEL, RESET

•Select CANCEL if you do not want this unit’s parameters to be initialized when you reset the factory presets.

•Select RESET if you want all of this unit’s parameters to be initialized when you reset the factory presets.

Note

This setting does not affect ADVANCED SETUP menu item parameters.

ADVANCED SETUP MENU

Remote REMOTE

Use to switch the ID for the remote control of this unit. Choices: ID1, ID2

•Select ID1 to operate this unit using the default code.

•Select ID2 to operate this unit using an alternative code.

Note

You must also make settings for the remote control (see page 77).

OPERATION ADVANCED

73