Yamaha HTR-6130 A5 FM 90.5 MHz, E1 FM 87.5 MHz, 39 En, 2Press E PRESET/TUNING l / h or

Selecting preset stations

You can tune into any desired station simply by selecting the preset station group and number under which it was stored.

y

When performing this operation with the remote control, press 3TUNER to select “TUNER” as the input source.

1Press D A/B/C/D/E (or 7A/B/C/D/E l/ h) repeatedly to select the desired preset station group (A to E).

The preset station group letter appears in the front panel display and changes each time you press the button.

2Press E PRESET/TUNING l / h (or

7PRESET/CH k / n) to select the desired preset station number (1 to 8).

The preset station group and number appear in the front panel display along with the station band and frequency.

E1:FM 87.5 MHz

y

You can select the desired preset station number (1 to 8) directly by pressing the numeric buttons (N).

FM/AM tuning

Exchanging preset stations

You can exchange the assignments of two preset stations with each other. The example below describes the procedure to exchange preset station “E1” with “A5”.

1Select preset station “E1” using D A/B/C/D/E and E PRESET/TUNING l / h.

See “Selecting preset stations” on this page.

2Press and hold B PRESET/TUNING for more than 3 seconds.

“E1” and the MEMORY indicator flash in the front panel display.

Flashes

MEMORY

E1:FM 87.5 MHz

Flashes

3Select preset station “A5” using

D A/B/C/D/E and E PRESET/TUNING l / h.

“A5” and the MEMORY indicator flash in the front panel display.

See “Selecting preset stations” on this page.

Flashes

MEMORY

A5:FM 90.5 MHz

Flashes

4Press B PRESET/TUNING again.

“EXCHANGE E1–A5” appears in the front panel display and the assignments of the two preset stations are exchanged.

OPERATION BASIC

English

39 En