Yamaha HTR-6130 owner manual What do you want to do with this unit?

Quick start guide

Notes

*1 You must connect a cable TV or a satellite tuner to this unit in advance. See page 16 for details.

*2 You need to connect the supplied FM and AM antennas to this unit in advance. See page 19 for details.

*3 You have to tune into the desired radio station. See pages 37 to 39 for the tuning information.

*4 To achieve the best possible reception, orient the connected AM loop antenna, or adjust the position of the end of the indoor FM antenna.

y

If you cannot find the desired situation, you can select and change the assigned SCENE template for the SCENE buttons. See page 24 for details.

■After using this unit...

Press A STANDBY/ON on the front panel to set this unit to the standby mode.

This unit is set to the standby mode. To turn on this unit from the standby mode, press A STANDBY/ON (or DPOWER) on the front panel. See page 19 for details.

Note

In the standby mode, this unit consumes a small amount of power in order to receive infrared signals from the remote control.

What do you want to do with this unit?

■Customizing the SCENE templates

• Using various SCENE templates

☞ P. 24

■Using various input sources

• Basic controls of this unit		☞ P. 29
• Enjoying FM/AM radio programs		☞ P. 37
•	Using your iPod with this unit	☞ P. 40
•	Using the Bluetooth component	☞ P. 41

■Using various sound features

• Using various sound field programs

☞ P. 34

■Adjusting the parameters of this unit

• Optimizing the speaker parameters for your

listening room (BASIC SETUP) ☞ P. 22

• Manually adjusting various parameters of

	this unit	☞ P. 43
•	Setting the remote control	☞ P. 51
•	Adjusting the advanced parameters
		☞ P. 54

■ Additional features

• Automatically turning off this unit

☞ P. 33

8 En