Set menu
3 OPTION MENU
Use this menu to adjust the optional system parameters.
■Display settings A)DISPLAY SET
Dimmer DIMMER
Use this feature to adjust the brightness of the front panel display.
Control range: – 4 to 0
Control step: 1
•Press 7lto make the front panel display dimmer.
•Press 7hto make the front panel display brighter.
■Memory guard B)MEMORY GUARD
Memory guard MEM.GUARD
Use this feature to prevent accidental changes to DSP program parameter values and other system settings. Choices: OFF, ON
•Select “OFF” to turn off the “MEM.GUARD” feature.
•Select “ON” to protect:
–sound field program parameters
–all set menu items
–all speaker levels
–SCENE template parameters
Note
When “MEM.GUARD” is set to “ON”, you cannot select and adjust any other set menu items.
■Audio select C)AUDIO SELECT
Use this feature to designate the default audio input jack select setting for the input sources when you turn on the power of this unit.
Choices: AUTO, LAST
•Select “AUTO” if you want this unit to automatically detect the type of input signals and select the appropriate input mode.
•Select “LAST” if you want this unit to automatically select the last input mode used for the connected input source (see page 31).
■ Parameter initialization D)PARAM. INI
Use this feature to set all the parameters of the sound field programs to the initial factory settings.
Choices: NO, YES
•Select “NO” to cancel the parameter initialization and return to the previous menu level.
•Select “YES” to set all the sound field parameters to the initial factory settings.
Notes
•You cannot automatically revert to the previous parameter settings once you initialize the sound field program parameters.
•You cannot separately initialize individual sound field programs.
■Bluetooth setting E)BLUETOOTH
Start pairing START PAIRING
Use this feature to start pairing the connected Yamaha Bluetooth adapter (such as
To ensure security, a time limit of 8 minutes is set for the pairing operation. You are recommended to read and fully understand all the instructions before starting.
1Select “START PAIRING” in “BLUETOOTH” and then press 7ENTER to start pairing.
The connected Bluetooth adapter starts searching Bluetooth components. “Searching...” appears in the front panel display.
2Check that the Bluetooth component detects the Bluetooth adapter.
If the Bluetooth component the Bluetooth adapter,
3Select the Bluetooth adapter in the Bluetooth device list and then enter the pass key “0000” on the Bluetooth component.
Once this unit completes the pairing successfully, “Completed” appears.
y
To cancel the pairing, press 8RETURN to exit from “START PAIRING”.
4Press 8RETURN to exit from “START PAIRING”.
Notes
•If the connected Bluetooth adapter cannot find any Bluetooth components, “Not found” appears.
•If a Bluetooth adapter is not connected to this unit, “No BT adapter” appears.
