Caution: Read this before operating your unit.

1To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

2Install this sound system in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit.

3Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.

4Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in a environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury.

5Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place:

Other components, as they may cause damage and/or discoloration on the surface of this unit.

Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury.

Containers with liquid in them, as they may fall and liquid may cause electrical shock to the user and/or damage to this unit.

6Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.

7Do not plug in this unit to a wall outlet until all connections are complete.

8Do not operate this unit upside-down. It may overheat, possibly causing damage.

9Do not use force on switches, knobs and/or cords.

10When disconnecting the power cable from the wall outlet, grasp the plug; do not pull the cord.

11Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.

12Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.

13To prevent damage by lightning, keep the power cord and outdoor antennas disconnected from a wall outlet or the unit during a lightning storm.

14Do not attempt to modify or fix this unit. Contact qualified Yamaha service personnel when any service is needed. The cabinet should never be opened for any reasons.

15When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power plug from the wall outlet.

16Install this unit near the AC outlet and where the AC power plug can be reached easily.

17Be sure to read the “Troubleshooting” section on common operating errors before concluding that this unit is faulty.

18Before moving this unit, press A STANDBY/ON to set this unit in the standby mode, and disconnect the AC power plug from the wall outlet.

19VOLTAGE SELECTOR (Asia and General models only) The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC wall outlet.

Voltages are 110–120/220–240 V AC, 50/60 Hz.

20The batteries shall not be exposed to excessive heat such as sunshine, fire or like.

21Excessive sound pressure from earphones and headphones can cause hearing loss.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off by A STANDBY/ON. This state is called the standby mode. In this state, this unit is designed to consume a very small quantity of power.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to wide slot and fully insert.

This Class B digital apparatus complies with Canadian ICES-003.

POUR LES CONSOMMATEURS CANADIENS

Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’au fond.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

IMPORTANT

Please record the serial number of this unit in the space below.

MODEL:

Serial No.:

The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference.

Caution-iii En

Page 4
Image 4
Yamaha HTR-6130 owner manual For Canadian Customers, Pour LES Consommateurs Canadiens, Serial No

HTR-6130 specifications

The Yamaha HTR-6130 is a versatile home theater receiver that embodies innovation and functionality, making it a popular choice for audio enthusiasts. Designed to deliver immersive surround sound experiences, it serves as the cornerstone for any home entertainment setup.

One of the standout features of the HTR-6130 is its robust audio output. With a powerful 5.1-channel configuration, it is equipped to handle up to 100 watts per channel, allowing users to enjoy dynamic sound reproduction whether they're watching a movie or listening to music. The receiver supports high-definition audio formats like Dolby TrueHD and DTS-HD Master Audio, ensuring that users experience sound the way the creators intended.

The HTR-6130 integrates multiple connectivity options, making it highly adaptable to various devices. It boasts four HDMI inputs and one output, supporting 4K pass-through, as well as a variety of legacy inputs including composite, component, and optical connections. This wide array of connectivity options enables integration with Blu-ray players, gaming consoles, and streaming devices with ease.

Yamaha has included its proprietary YPAO (Yamaha Parametric room Acoustic Optimizer) technology in the HTR-6130. This advanced feature automatically analyzes the room's acoustics and optimizes the speaker settings for the best sound experience. The result is a more balanced audio environment tailored to your specific space, enhancing the overall listening experience.

The receiver also has a user-friendly interface, featuring an intuitive on-screen display and remote control. This makes setup and operation straightforward, even for those who may not be tech-savvy. The HTR-6130 also supports a variety of audio formats, including MP3, WAV, and WMA, allowing users to play their favorite tunes with great clarity.

Another important aspect of the Yamaha HTR-6130 is its energy efficiency. The receiver is designed to consume less power without sacrificing performance, making it an eco-friendly choice for audiophiles.

In summary, the Yamaha HTR-6130 is an excellent home theater receiver that combines power, versatility, and advanced technology. With its high-quality audio output, extensive connectivity options, and smart optimization features, it offers an exceptional user experience, making it a solid choice for anyone looking to elevate their home entertainment system.