Yamaha MOTIF-RACK Internal AWM2 Tone Generator and optional Plug-in board

Basics Section

Overview of the MOTIF-RACK

Internal AWM2 Tone Generator and optional Plug-in board

The tone generator block in the MOTIF-RACK consists of the built-in AWM2 and optional Plug-in units.

AWM2 (Advanced Wave Memory 2) is a synthesis system based on sampled waves (sound material), and is used in

many Yamaha synthesizers. For extra realism, each AWM2 Voice uses multiple samples of a real instrument’s

waveform. Furthermore, a wide variety of envelope generator, ﬁlter, modulation, and other parameters can be

applied to the basic waveform.

nAWM2 is not just limited to general musical instruments (Normal Voices). It can also be used for setting up percussive

instruments (Drum Voices). For details on Normal and Drum Voices, see page 25.

Plug-in Boards give you an enormous amount of additional sonic ﬂexibility and power. When installed, they work

seamlessly and transparently within the system of the MOTIF-RACK – meaning that you can use their sounds and

functions just as if they were built right into the MOTIF-RACK at the factory.

Up to two Plug-in Boards can be installed to the MOTIF-RACK (see box below for available boards). These boards

are not simply a source of more Voices; they are also tone generators in their own right and extend the system-level

speciﬁcations such as maximum polyphony. In addition, they allow you to use synthesis systems besides AWM2.

You can play Plug-in Voices just like ordinary internal Voices and use them as Parts in a Multi (page 30).

The MOTIF-RACK is compatible with the Modular Synthesis Plug-in System. Two types of Modular Synthesis Plug-

in System-compatible Plug-in Boards can be installed to the MOTIF-RACK: Single Part and Multi-Part Plug-in Board.

Using these, you can build your own system based on the sounds you want or need.

nThe Effect Plug-in Board cannot be used with the MOTIF-RACK.

Single Part Plug-in Boards

•Analog Physical Modeling Plug-in Board (PLG150-AN)

Using Analog Physical Modeling (AN) synthesis, the very latest digital technology is used to accurately reproduce the sound of

analog synthesizers. With this board installed, you have real-time control over the playback of vintage synthesizer sounds as well

as the very latest sounds heard in today’s dance and pop music.

•Piano Plug-in Board (PLG150-PF)

A massive amount of waveform memory is dedicated to the reproduction of piano sounds. This board offers 136 stereo sounds,

including a number of acoustic and electric pianos, and up to 64-note polyphony. You can even install two of these boards to

double the polyphony to 128 notes.

•Advanced DX/TX Plug-in Board (PLG150-DX)

The sounds of the DX7 are available on this Plug-in Board. Unlike with PCM-based tone generators, this board uses the powerful

FM Synthesis system— the same as found on DX-series synthesizers— for extraordinarily versatile and dynamic sound shaping

potential. Sounds are compatible with those of the DX7, and the board can even receive DX7 data via MIDI bulk dump.

•Virtual Acoustic Plug-in Board (PLG150-VL)

With Virtual Acoustic (VA) synthesis, the sounds of real instruments are modeled (simulated) in real time, giving a degree of

realism that cannot be achieved using conventional PCM-based synthesis techniques. When playing these sounds using an

optional MIDI Wind Controller (WX5), you can even capture some of the physical feel of woodwind instruments.

•Drums Plug-in Board/Percussion Plug-in Board (PLG150-DR/PLG150-PC)

Incorporates the highly-acclaimed AWM2 engine dedicated to the reproduction of drum/percussion sounds. This board also has

its own dedicated effects processing. This means that you can apply Reverb and insertion effect to the voice, letting you use all of

the effects on the “mother” device for the other Parts.

Internal AWM2 Tone Generator Plug-in boards (optional)