44
Quick Guide
Using the Multi Mode
Simple Mixer functions (Mixing Edit Mode)
The Mixing Edit mode lets you easily edit some basic
parameters with a graphic mixer-like layout that allows
you to check each part’s setting. This mode is useful for
changing parameters for each part even while song data
is being played back from a connected sequencer.
Simple mixing functions and basic parameters are
provided in the mode, such as selecting Voices, changing
effect settings and so on. If you want to edit a Multi in
greater detail, see the Multi Edit mode (page 45).
Press the [MULTI] button in the Multi Play mode. The
[MULTI] button LED changed from green to red,
indicating that the Mixing Edit mode is selected.
Select the desired Part with the Part/Element buttons
([1/5/9/13] – [4/8/12/16]).
Repeatedly pressing one of the buttons alternates
among the Part numbers. For example, pressing the [1/
5/9/13] button repeatedly calls up Parts 1, 5, 9 and 13
in order.
You can also step through the Parts in order by
simultaneously holding down the [SHIFT] button and
using the PART [
EE
EE
][
FF
FF
] buttons.
Select the desired display by using the PAGE [
EE
EE
][
FF
FF
]
buttons, then edit the parameters in each display.
The Mixing Edit mode has three edit displays: Voice,
Output, and Effect.

•Voice

From this display you can select a Voice for each
Part. Select a Voice Bank with the “BankMSB/
BankLSB” parameter and select the desired Voice
with the “VoiceNo.” parameter.
nBy selecting the BankMSB/BankLSB parameter with the
cursor [ ][ ] buttons and using the data dial, you can
call up the Voice Banks listed below.
*For details about Plug-in Board Voices, refer to page 30.

•Output

From this display you can set the Pan and Volume
for each Part.
Select “Pan” or “Volume” with the cursor [ ][ ]
buttons and use the data dial to change the settings.

• Effect

From this display you can adjust the Reverb/Chorus
effect for each Part. You can also select the Parts to
which the Insertion Effect is applied.
For an application example showing how to use
effects, see page 47.
1Enter the Mixing Edit mode.
2Select the desired Part.
3Select the desired display.
Normal Voice Drum Voice Plug-in Voice
Pr1-5: Preset
Banks PD: Preset Drum Bank Pp (Pp1-3): Plug-in
Preset Bank(s)
GM: GM Bank GD: GM Drum Bank Pu1-3: Plug-in User
Banks
Us1-2: User Voice
Banks UD: User Drum Bank PB: Plug-in Board
Voice Bank*