42
Quick Guide
Playing the voices
The following parameters are used to edit the System
Effect. Select the desired parameter with the cursor
[][] buttons and change the setting by using the
data dial.
nFor information on the Effect Parameters, refer to the
separate Data List.
• ReverbType (Reverb Type)
RevSend (Reverb Send)
ReverbRtn (Reverb Return)
ReverbPan (Reverb Pan)
Determines the Reverb Effect settings, such as type,
send level, return level, panning.
• ChoCtgry (Chorus Category)
ChoType (Chorus Type)
ChoSend (Chorus Send)
ChoRtn (Chorus Return)
ChoPan (Chorus Pan)
Determines the Chorus Effect settings, such as type,
send level, return level, panning.
• ChoToRev (Chorus to Reverb)
Determines the send level from Chorus to Reverb.
Press the [EFFECT] button again to call up the
following display.
Use the PAGE [
EE
EE
][
FF
FF
] buttons to select the Effect
type that you want to edit.
Select the desired parameter with the cursor [ ][ ]
buttons and change the setting by using the data dial.
nFor information on the Effect Parameters, refer to the
separate Data List.
nIf “thru” is selected for the effect type, none of the effect
parameters can be edited.
If you wish to save the new settings, store the settings
with the other Voice parameters as a single Voice
before you leave the selected Voice. For details about
storing Voices, see page 57.
If you call up another Voice or another mode without
saving, the edited settings may be lost.
5Edit the detailed Effect parameters.
Effect Type (Ins1, Ins2, Rev, Cho)
6Storing edited Voice.