154
Second SIMM
After confirming the orientation, insert the second SIMM
into the FRONT SLOT (the slot closest to the PSR-8000
keyboard), and raise it to the vertical position in the same
way as the first SIMM.
3-3
Installing Options
3-2
C-2 Install the first SIMM in the REAR SLOT (the slot
closest to the PSR-8000 rear panel), inserting it at an
angle as shown in the illustration.
Make sure that the parts at locations A, B, and C are
properly aligned.
• Lug
• SIMM hole
• Slot protrusion
• SIMM notch
•Lug
• SIMM hole
A
B
C
C-3 Holding both edges of the SIMM module, raise it to
the vertical position until it is firmly clamped by the
left and right stoppers.
• Make sure that the entire length of the
SIMM is evenly inserted.