Yamaha PSR-8000 Optional Hard Disk Installation

156
Optional Hard Disk Installation
1
2
3
ZBefore installing the hard disk be sure to save any impor-
tant data to floppy disk by using the SAVE TO DISK
function described on page 141. Also remove the backup
batteries.
Turn the PSR-8000 power OFF and unplug the power
cord from both the AC wall socket and the instrument’s
rear panel. Turn the instrument upside down and rest it on
a blanket or other soft surface.
XRemove the four silver screws from the edge of the hard
disk cover in the corner of the instrument’s bottom panel.
These will be used later to attach the hard disk (step B).
CRemove the four black screws from the corners of the hard
disk cover, and remove the cover.
Installing Options
• Silver screws.
■ Hard Disk
The hard disk used must be a 2.5 inch IDE compatible
type with a capacity of 815 megabytes or more, but some
types may have different mounting requirements or may
not function properly. Yamaha recommends the follow-
ing hard disk units:
Toshiba MK0803MAT
Toshiba MK1003MAV
Fujitsu M2724TAM
• The maximum effective use of any hard disk used with the
PSR-8000 will be 780 megabytes, even if the hard disk itself
has higher capacity.
Please note that these recommendations may be changed
at a later date. Ask your nearest Y amaha representativ e or
an authorized distributor listed at the end of this owner’s
manual for information on the latest hard disk recom-
mendations.
Install a hard disk at your own risk. Yamaha will not be
held responsible for any damage or injury resulting from
improper installation or the use of a hard disk other than
one of the types recommended by Yamaha.
• Black screws.