197
Notes
*1 The tracks for each channel can be selected via the panel.
See page 135 for more information.
*2 The tone generator normally functions as a 16-channel multi-
timbre tone generator in response to MIDI input. MIDI messages
therefore do not normally affect the panel voices or other panel
settings.
The MIDI messages listed below, however, do affect the panel
voice, style, multi pad, and song settings.
MIDI MASTER TUNE, XG System parameter MASTER TUNE
XG System parameter TRANSPOSE
System exclusive messages which change the REVERB,
CHORUS or DSP EFFECT settings.
XG MULTI EQ parameters
Also, MIDI messages affect the panel settings when one of the
following MIDI reception modes is selected.
These modes can be selected via the panel functions (see page
136).
LEAD, RIGHT1, RIGHT2, LEFT, KEYBOARD, ACMP
RHYTHM1, ACMP RHYTHM2, ACMP BASS, ACMP CHORD1,
ACMP CHORD2, ACMP PAD, ACMP PHRASE1, ACMP
PHRASE2:
See “MIDI RECEIVE MESSAGES FOR INDIVIDUAL PARTS”
below.
• CHORD:
The note on/off messages received at the channel(s) set to
“CHORD” are recognized as the fingering for the accompani-
ment section. The chords to be detected depend on the
fingering modes specified for the PSR-8000. The chords will be
detected regardless of the accompaniment on/off and split point
settings on the PSR-8000 panel.
• ROOT:
The note on/off messages received at the channel(s) set to
“ROOT” are recognized as the bass notes for the accompani-
ment section. The bass notes will be detected regardless of the
accompaniment on/off and split point settings on the PSR-8000
panel.
PANEL CONTROL:
The note on/off messages control the panel function which is
selected via the MIDI PANEL CONTROL page. See page 138.
VOCAL HARMONY:
See “VOCAL HARMONY MIDI SPECIFICATIONS” below.
• OFF:
MIDI channel messages will not be received on the designated
channel.
*3 These Control Change Messages are not transmitted by PSR-
8000 panel operation, but may be transmitted by AUTO ACCOM-
PANIMENT or SONG playback.