48

In addition to the many organ voices in the [ORGAN] voice category, the PSR-

8000 has an ORGAN FLUTE voice which can be assigned to the currenty se-

lected part and edited by pressing the VOICE [ORGAN FLUTE] button. The main

ORGAN FLUTE editing display will appear when the [ORGAN FLUTE] button is

pressed. (If the RETURN LCD button is showing, press it to return to the main

display.)

Organ Flute Voice EditingOrgan Flute Voice Editing
■ORGAN TYPE...............................................................................
This parameter specifies the type of organ tone generation to
be simulated: Sine or Vintage. Press the ORGAN TYPE LCD
button to alternately select Sine or Vintage.
■ROTARY SP SPEED ..............................................................
The Rotary SP Speed LCD button alternately switches
between the slow and fast rotary speaker speeds when a rotary
speaker effect is selected for the ORGAN FLUTE voice (see
“EFFECT & EQ SETTINGS”, below), and the VOICE EF-
FECT [DSP(4-6)] button is turned on (the Rotary SP Speed
LCD button has the same effect as the VOICE EFFECT [DSP
VARIATION] button).
■VIBRATO ON/OFF........................................................................................................................................................................
This LCD button alternately turns the vibrato effect for the ORGAN FLUTE voice ON or OFF.
• If an effect other than a rotary speaker effect is selected for the ORGAN FLUTE voice, the Rotary SP Speed LCD button has the same
effect as the VOICE EFFECT [DSP VARIATION] button.
• The Rotary SP Speed LCD button may not have the expected effect if the rotary speaker effect “LFO Freq” parameter has been
edited.
■VIBRATO DEPTH..........................................................................................................................................................................
The ORGAN FLUTE vibrato depth can be set to any of three levels via the Vibrato Depth LCD button. The
button sequentially selects a depth of “1”, “2”, or “3”.
• Vibrato speed can be adjusted via the SETTING display — see “EFFECT & EQ SETTINGS”, below.
■FOOTAGE.............................................................................................................................................................................................
The basic sound of the ORGAN FLUTE voice is edited via FOOTAGE bars corresponding to the LCD dials. If the
FOOTAGE display is not showing, press the FOOTAGE LCD button on the left side of the display. The term
“FOOTA GE” is a reference to the fact that the sound of pipe organs is adjusted via “stops” which turn on or off pipes
of different lengths (in feet). The longer the pipe, the lower the pitch of the sound, thus the 16' (16-foot) FOOTA GE
bar adjusts the volume of the lowest pitched component of the voice while the 1' bar adjusts the highest-pitched