80

DYNAMICS

■DYNAMICS..........................................................................................................................................................................................
The parameters in this display are used to change the velocity
of certain notes to complement the required “groove” feel.
Use the SECTION LCD dials to select the section contain-
ing the part you want to apply groove dynamics to, and the
PART dial to select the specific part.
The ACCENT TYPE LCD dials select the type of accent
template to be applied to the selected section/part.
The STRENGTH dial determines how “strongly” the se-
lected ACCENT TYPE will be applied. Higher values produce
a stronger effect.
The EXPAND/COMP. dial expands or compresses the
range of velocity values in the selected section, based on a
“central” velocity value of “64”. Values higher than 100%
expand the dynamic range, and values lower than 100% com-
press the dynamic range.
The BOOST/CUT dial boosts or cuts all velocity values in
the selected section/part. Values above 100% boost the overall
velocity and values below 100% reduce the overall velocity.
Press the PRESET LCD button to restore the default settings
for the current style.
■SETUP COPY ...............................................................................
Copies all DYNAMICS parameter settings from the SOURCE
SECTION and PART to the specified DESTINATION SEC-
TION and PART.
Use the SOURCE SECTION, SOURCE PART, DESTINA-
TION SECTION, and DESTINATION PART LCD dials to
specify the source and destination sections and parts as re-
quired.
Press the EXECUTE button.

STORE/CLEAR

■NAME....................................................................................................
A name can be entered for each groove style as described on
page 21.
The Groove Style Creator