99
■STORE AS CUSTOM VOICE.............................................................................................................................................

1: CUSTOM VOICE NAME

Enter an original name for the custom voice as described on
page 21.

2: STORE AS CUSTOM VOICE

This function stores the current waveform as a custom voice
which can be edited via the CUSTOM VOICE CREA TOR (page
51) or selected via the VOICE [CUSTOM VOICE] button and
played on the PSR-8000 keyboard in the same way as the other
voices.
Use the STORE AS CUSTOM VOICE LCD dials to select
the CUSTOM VOICE number to which you want to store the
waveform, then press the EXECUTE LCD button.
• The corresponding waveform must also be saved to disk in order to use
the stored custom voice the next time the PSR-8000 is turned on. If the
corresponding waveform has not been saved to disk, an alert will
appear following the SAVE AS CUSTOM VOICE operation.
• Waveform data is not actually stored with the CUSTOM VOICE data,
but is retained in the wave RAM memory. When the FUNCTION mode
AUTO LOAD function (page 131) is ON and a disk containing the
appropriate waveform data is loaded, the waveform data for the custom
voices will automatically be loaded into the wave RAM memory when
the PSR-8000 is turned on. If the AUTO LOAD function is off or the
appropriate waveform data is not found when the PSR-8000 is turned
on, the corresponding custom voices will automatically be erased.
• The VOICE SIZE shown on the display is the size of the custom voice
data (always 1K, not including the waveform data). The FREE AREA is
the total amount of remaining CUSTOM VOICE memory.

3: CLEAR CUSTOM VOICE

Use the CLEAR CUSTOM VOICE LCD dials to select a
CUSTOM VOICE to be cleared, then press the EXECUTE LCD
button.
Sampling