CONTROLS AND FUNCTIONS
Remote control
This section describes the function of each button on the remote control used to control this unit or a Yamaha CD player.
■Common controls
The following buttons can be used no matter which input source is selected.
1Infrared signal transmitter
Sends infrared signals.
2A (power)
Turns this unit on, or sets it to standby mode.
Note
This button functions only when the A(power) button on the front panel is in the on position.
3DIMMER
Changes the brightness level of the front panel display. Choose brightness from 3 levels by pressing this button repeatedly.
y
This setting is retained even if you turn off this unit.
4SLEEP
Sets the sleep timer (see page 17).
5Input selector buttons
Select the input source you want to listen to.
y
•The input source names correspond to the names of the connection jacks on the rear panel.
•To select TUNER as the input source using the remote control, press FM or AM.
6OPTION
Turns the OPTION menu on and off (see page 29).
7SPEAKERS A/B
Turns on and off the set of speakers connected to the SPEAKERS A and/or SPEAKERS B terminals on the rear panel of this unit when the corresponding button is pressed.
8MUTE
Mutes the sound output. Press again to restore the sound output to the previous volume level.
9VOLUME +/–
Increases or decreases the sound output level.
Note
This does not affect the output level of the REC jacks.
0RETURN
Returns to the previous menu or ends the menu display when using the Option menu (see page 29).
AB / C / D / E / ENTER
Selects and confirms items in the Option menu (see page 29).
BTP
This button can be used for the Europe model only.