Adjusting the tonal quality
■Using the PURE DIRECT switch
Routes input signals from your audio sources so that the input signals bypass the BASS, TREBLE, BALANCE and LOUDNESS controls, thus eliminating any alterations to the audio signals and creating the purest possible sound. The PURE DIRECT indicator lights up and the front panel display turns off after a few seconds.
PURE DIRECT switch
Notes
•The BASS, TREBLE, BALANCE, and LOUDNESS controls do not function while the PURE DIRECT feature is turned on.
•This setting is retained even if you turn off this unit.
PLAYING AND RECORDING
■Adjusting the BASS and TREBLE controls
TREBLE
BASS
The BASS and TREBLE controls adjust high and low frequency response.
The center position produces a flat response.
BASS
When you feel there is not enough bass (low frequency sound), rotate clockwise to boost. When you feel there is too much bass, rotate counterclockwise to suppress. Control range:
TREBLE
When you feel there is not enough treble (high frequency sound), rotate clockwise to boost. When you feel there is too much treble, rotate counterclockwise to suppress.
Control range:
OPERATION | BASIC |
|
|
■Adjusting the BALANCE control
BALANCE
The BALANCE control adjusts the sound output balance of the left and right speakers to compensate for sound imbalance caused by speaker locations or listening room conditions.