Connecting an infrared signal receiver or Yamaha component to the REMOTE IN/OUT jacks
An infrared signal receiver can be connected to the REMOTE IN jack using a monaural 3.5 mm mini plug cable as follows. In addition, Yamaha components that are capable of transmitting and receiving remote control signals can be connected to the REMOTE IN and REMOTE OUT jacks.
CONNECTIONS
Connecting power cable
Plug the power cable into the AC wall outlet after all other connections are complete.
To the wall outlet with the power cable
PREPARATION
Remote | Remote |
control out | control in |
Infrared signal | Yamaha component |
receiver or Yamaha | (CD or DVD player, etc.) |
component |
|
•By connecting the remote control output jack of an infrared signal receiver to the REMOTE IN jack, you can control this unit using the remote control even if this unit is placed in a rack or other location where the remote control signals cannot reach.
•By connecting the remote control input jack of another Yamaha component to the REMOTE OUT jack, you can control the component using the remote control of this unit or the Yamaha component.
y
Up to six Yamaha components can be connected in series using the remote control input and output jacks.