ATUNING jj / ii

Selects the tuning frequency when TUNER is selected as the input source (see page 18).

BRemote control sensor

Receives infrared signals from the remote control.

CPURE DIRECT and indicator

Allows you to listen to a source in the purest possible sound (see page 15). The indicator above it lights up and the front panel display turns off when this function is turned on.

DPHONES jack

Outputs audio to your headphones for private listening.

Note

Press SPEAKER A/B so that the SP A/B indicators turn off before you connect your headphones to the PHONES jack.

EBASS control

Increases or decreases the low frequency response. The center position produces a flat response (see page 15).

FTREBLE control

Increases or decreases the high frequency response. The center position produces a flat response (see page 15).

GBALANCE control

Adjusts the sound output balance of the left and right speakers to compensate for sound imbalances caused by speaker locations or listening room conditions (see page 15).

HLOUDNESS control

Retains a full tonal range at any volume level to compensate for the human ears’ loss of sensitivity to high and low-frequency ranges at a low volume level (see page 16).

IINPUT selector

Selects the input source you want to listen to.

JVOLUME control

Increases or decreases the sound output level.

Note

This does not affect the output level of the REC jacks.

CONTROLS AND FUNCTIONS

INTRODUCTION

5 En