PLAYING BACK TUNES FROM YOUR iPhone/iPod/Bluetooth™ COMPONENT
Using a Bluetooth Wireless Audio Receiver
Note
This unit supports A2DP (Advanced Audio Distribution Profile) and AVRCP (Audio and Video Remote Control Profile) of the Bluetooth profile.
■Pairing Bluetooth™ components
1Rotate the INPUT selector on the front panel (or press DOCK on the remote control) to select DOCK as the input source.
2Turn on the Bluetooth component you want to pair and set it to pairing mode.
3Press OPTION on the remote control.
The Option menu for DOCK displayed (see page 29).
4Press B / C on the remote control to select “Pairing”, and then press ENTER.
“Searching...” is displayed and pairing begins.
MEMORY | INPUT selector |
DOCK 
B / C
ENTER
RETURN 
OPTION 
Be sure to pair the Bluetooth Wireless Audio Receiver and the Bluetooth component when connecting for the first time or when settings have been deleted.
Refer to the operating instructions of your Bluetooth component as necessary when carrying out pairing.
Note
The Bluetooth Wireless Audio Receiver can be paired with up to eight Bluetooth components. When the ninth device is paired, the pairing settings for the device which has not been used for the longest period of time will be deleted.
y
To cancel pairing, press RETURN on the remote control.
5Make sure the Bluetooth component recognizes the Bluetooth Wireless Audio Receiver.
When the component is recognized, it will be displayed in the Bluetooth component list, for example as
6Select the Bluetooth Wireless Audio Receiver from the Bluetooth component list, and enter a pass key “0000” using the Bluetooth component.
When pairing is complete, “Completed” is displayed on the front panel display.
To exit the Option menu, press OPTION on the remote control.
y
When the input source is set to DOCK, you can also begin pairing by pressing and holding MEMORY on the front panel (or ENTER on the remote control).
OPERATION | BASIC |
|
|