FM/AM TUNING
There are 2 tuning methods; automatic and manual. Select either method according to your preference and the strength of station signals.
Automatic tuning
Automatic tuning is effective when station signals are strong and there is no interference.
INPUT selector
TUNING jj / ii
FM, AM
FM, AM
1Rotate the INPUT selector on the front panel (or press FM or AM on the remote control) to select TUNER as the input source.
3Press and hold TUNING jj / ii on the front panel for more than 1 second to begin automatic tuning.
Press iito tune in to a higher frequency. Press jjto tune in to a lower frequency.
Notes
•When you tune in to a station, the frequency of the station is displayed on the front panel display.
•If the tuning search does not stop at the desired station because the station signals are weak, try using the manual tuning method.
■Auto Mute feature
When listening to an FM radio station, the output will automatically be muted when the radio signal is weak if the station was tuned in to by:
•using the automatic tuning feature
•recalling a preset that was registered using the automatic preset registration feature
If you want to listen to a station that has a weak signal, tune in to the station manually.
Note
If you press FM or AM on the remote control to select TUNER as the input source, the corresponding band is also selected, therefore you may skip step 2.
2Press FM or AM on the front panel (or FM or AM on the remote control) to select the reception band (FM or AM).
FM or AM is displayed on the front panel display.