TROUBLESHOOTING

Bluetooth™

The following messages may be displayed on the front panel display in certain situations.

Message

Status/Cause

Remedy

See

page

 

 

 

 

 

 

 

Searching...

The Bluetooth Wireless Audio Receiver

 

 

and the Bluetooth component are in the

 

 

process of pairing.

 

 

 

 

 

 

 

The Bluetooth Wireless Audio Receiver

 

 

and the Bluetooth component are in the

 

 

process of establishing a connection.

 

 

 

 

 

 

Completed

The pairing is completed.

 

 

 

 

 

Canceled

The pairing is canceled.

 

 

 

 

 

Connected

The connection between the Bluetooth

 

 

Wireless Audio Receiver and the

 

 

Bluetooth component is established.

 

 

 

 

 

 

Disconnected

The Bluetooth component is

 

 

disconnected from the Bluetooth Wireless

 

 

Audio Receiver.

 

 

 

 

 

 

Not found

The Bluetooth component is not found.

During pairing:

 

 

 

– pairing must be performed on the Bluetooth

 

 

 

component and this unit simultaneously. Check if

 

 

 

the Bluetooth component is in pairing mode.

 

 

During connecting:

 

 

– check if the Bluetooth component is turned on.

 

 

 

– check if the Bluetooth component is within 10 m

 

 

 

(32 feet) of the Bluetooth Wireless Audio

 

 

 

Receiver.

 

 

 

 

 

 

Pairing may not have been achieved.

Try pairing again.

27

 

 

 

 

Remote control

Problem

Cause

Remedy

See

page

 

 

 

 

 

 

 

The remote control

Wrong distance or angle.

The remote control will function within a maximum

9

does not work nor

 

range of 6 m (20 ft) and no more than 30 degrees off-

function properly.

 

axis from the front panel.

 

 

 

 

 

 

Direct sunlight or lighting (from an

Reposition this unit.

 

 

inverter type of fluorescent lamp, etc.) is

 

 

striking the remote control sensor of this

 

 

 

 

 

unit.

 

 

 

 

 

 

 

The batteries are weak.

Replace all batteries.

9

 

 

 

 

36 En