Selecting Audio Sources

This section explains how to turn on the RP-U100 and select input sources.

If any external audio equipment is connected to the RP-U100, turn it on first.

1. Press the POWER switch to turn on the RP-U100.

The message “Hello” appears for

a few seconds, and the RP-U100 returns to the state in which it was last used (e.g., the input source that was selected when the RP-U100 was turned off is selected).

2.Use the input selector keys to select one of the following input sources.

PC

AUX1

AUX2

TUNER

• PC

Press the PC key repeatedly to select the following PC inputs: USB, PC_DG, and PC_AN. USB select the USB port, PC_DG selects the DIGITAL PC COAX IN and DIGITAL PC OPT IN, and PC_AN selects the ANALOG PC IN.

PC iUSB

PC

PC (digital)

j

VIRTUAL

 

DSP

VIRTUAL

DSP

USB PCM DD

 

 

USB PCM DD

 

FM AM ST

MEMORY

FM AM ST

MEMORY

U S B D G

P C _ D G

VOL

 

 

VOL

 

PC

 

 

 

PC

 

 

VIRTUAL

DSP

 

 

 

USB PCM DD

 

 

 

 

FM AM ST

MEMORY

 

P C _ A N

VOL

PC (analog)

Note: The DIGITAL PC OPT IN has priority over the DIGITAL PC COAX

IN, so if you connect to both inputs, the signal received at the DIGITAL PC OPT IN is used.

• AUX1

Press the AUX1 key to select the equipment connected to the ANALOG AUX 1 IN or DIGITAL AUX 1 OPT IN connector as the input source.

Note: The DIGITAL AUX 1 OPT IN has priority over the ANALOG AUX 1 IN, so if you connect to both inputs, the signal received at the DIGITAL AUX 1 OPT IN is used.

• AUX2

Press the AUX2 key to select the equipment connected to the ANALOG AUX 2 IN connectors as the input source.

• TUNER

Press this key repeatedly to select the following tuner bands: FM Auto Stereo, FM Mono, or AM.

VIRTUAL DSP

USB PCM DD

FM AM ST MEMORY

9 2 . 5 0

VOL

3.Start the selected input source. See page 11 for more information about using the tuner.

4.Use the volume control to adjust the volume level.

10