Opening Page

54/68 ページ

Tuner Panel

(Frequency Display)

[Panel image On][Panel image Off]

Calling Up the Tuner PanelTuner mode

Selecting tuner mode in the input selector on the main panel and clicking brings up the frequency display panel.

Tuner Panel (frequency displa y) functions
PanelComponentFM/AM selector buttonAuto scan buttons

Manual tuning

buttons

Function

Click on FM or AM to select the respective frequency band.

Select FM Auto Stereo or FM Mono with the FM mode selector button..

This function automatically scans the frequency band for stations. Auto scan may not be able to tune in a station if its signal is weak.

Auto scan function

Clicking the Scan button starts the station search. The search ends when a station is found.

Click the Scan button again if the scan stops during the search. Search stops also when the auto-scan button is clicked during search. To restart search, click the auto-scan button.

If no station is found, the search stops at the frequency where the search began.

This button lets you tune to a station manually.

Manual tuning operation

The frequency increases or decreases by one step each time or is clicked.

Keeping a button clicked causes the frequency to change continuously.