Controls and Functions

Front Panel

PC

AUX1

AUX2

1

• AUX1 key

This key selects the equipment connected to the ANALOG AUX 1 IN or DIGITAL AUX 1 OPT IN connector as the input source. The DIGITAL AUX 1

TUNER

2

34

DSP

P-SET

 

PERSONAL RECEIVER

5

RP-U100

6

78

AInput selectors & indicators

These four keys, explained below, are used to select the input source. The indicator of the selected source lights up.

• PC key

This key selects your PC as the input source. The following inputs can be selected: USB port, ANALOG PC IN, DIGITAL PC COAX IN, or DIGITAL PC OPT IN. The DIGITAL PC OPT IN has priority over the DIGITAL PC COAX IN, so if you connect to both inputs, the signal received at the DIGITAL PC OPT IN is used.

OPT IN has priority over the ANALOG AUX 1 IN, so if you connect to both inputs, the signal received at the DIGITAL AUX 1 OPT IN is used.

• AUX2 key

This key selects the equipment connected to the ANALOG AUX 2 IN connectors as the input source.

• TUNER key

This key selects the AM and FM bands of the built-in tuner as the input source. The following bands can be selected:

FM Auto Stereo, FM Mono, or AM.

BDisplay

The display shows various settings, selected input source, sound field pro- gram, and various other information.

CDSP key

This key activates the sound field pro- grams produced by the internal DSP.

DP-SET (Preset) key

This key selects the following tuner modes: Frequency Display mode and Preset mode.

•Frequency Display mode: In this mode, the radio frequency is displayed and you can tune the AM/FM tuner either manually or automatically.

•Preset mode: In this mode, you can select preset stations A1 through E8.

3