Opening Page

5/68 ページ

USB Capture

For USB capture, analog signals input to the analog jacks on the RP-U100 are subjected to analog/digital (A/D) conversion and then output in digital form via the USB link to a personal computer. This function allows the digital data to be recorded on the computer, using an application such as a sound recorder.

Input jacks for data capture

Which input jacks are used for data capture depends on the mode selected with the input selector.

Input selector details

Mode

Input jacks used for data capture

AUX1

AUX1 - ANALOG jack

AUX2

AUX2 - ANALOG jack

TUNER

Internal tuner signal

The USB capture function is not available in PC input mode.

Data Recording Methods

The RP-U100 Application does not include a recording function. Please use appropriate recording software installed on the computer. For information on how to use the software, please refer to its documentation.

The sound recorded with the USB capture function is the original sound of the input signal. The effects of the DSP sound field programs of the RP -U100 are not recorded.

The data format supplied to the computer is 44.1 kHz, 16 bit, stereo. Make sure that the recording software is set up properly to handle this format.

While making a recording using USB capture, you should close all other applications running on the computer. Otherwise recording quality may be poor.

Note

Digital input signals cannot be captured.

If data capture is activated while using the AUX1 - DIGITAL inputs, the RP-U100 automatically switches to the AUX1 - ANALOG inputs. After capture has ended, the setting automatically returns to the AUX1 - DIGITAL inputs.

Function List