Selecting Presets

1.Use the P-SET key to select Preset mode, as shown below.

VIRTUAL DSP

USB PCM DD

FM AM ST MEMORY

8 2 . A 3

VOL

Preset mode

2.Use the P-SET key to select a preset group from A through E.

3.Use the Down [￿] and Up [®] keys to select a preset number from 1 through 8.

The radio station stored in the preset is selected.

4.Press the TUNER key to check the frequency of the radio station. The frequency is displayed for a few seconds.

Note: If there is noise in an FM Stereo broadcast, store the preset again using FM Mono.

Copying Presets

Once stored, presets can be arranged using the Preset Copy function. You may, for example, want to copy your favorite radio station to preset A1.

1.Use the P-SET key to select Preset mode, as shown below.

VIRTUAL DSP

USB PCM DD

FM AM ST MEMORY

8 2 . A 3

VOL

Preset mode

2.Use the P-SET key to select the preset group, and the Down [￿] and Up [®] keys to select the preset number of the preset you want to copy.

3.Press and hold the P-SET key until “MEMORY” flashes on the display.

4.While “MEMORY” is flashing, use the P-SET key to select the preset group, and the Down [￿] and Up [®] keys to select the preset number of the destination preset. Then press and hold the P-SET key until the group and number (e.g., “B3”) of the preset be copied flashes on the display.

The preset is copied.

13