ZONE 2 CONNECTIONS

ANTENNA CONNECTIONS

Each antenna should be connected to the designated terminal(s) correctly, referring to the following diagram.

AM loop antena and indoor FM antena are supplied to this unit. In general, these antennas will provide sufficient signal strength.

Outdoor AM antenna

Outdoor FM antenna

Indoor FM antenna (included)

(U.S.A. and Canada models)

75-ohm/300-ohm antenna adapter

75-ohm coaxial cable

GND

AM

ANT

75Ω

FM

UNBAL.

ANT

AM loop

antenna

(included)PHONO

ZONE2

 

75-ohm/300-ohm

OUT

 

 

 

R

L

antenna adapter

AUDIO SIGNAL

 

 

 

300-ohm feeder

Ground

English

Connecting the AM loop antenna

1

2

3

1

3

2

Orient so that the best reception is obtained.

*The AM loop antenna should be placed apart from the main unit. The antenna may be hung on a wall.

*The AM loop antenna should be kept connected, even if an outdoor AM antenna is connected to this unit.

GND terminal

For maximum safety and minimum interference, connect the GND terminal to a good earth ground, which is a metal stake driven into moist earth.

Note

A poperly installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may improve the quality. Consult the nearest authorized YAMAHA dealer or service center about the outdoor antennas.

E-9