From page 10 to 15, this manual describes how to operate this unit mainly by using the front panel control parts. To operate this unit on the remote control transmitter, use the corresponding keys on the remote control transmitter.
BASIC OPERATIONS
TO PLAY A SOURCE
2 |
|
|
|
|
|
|
|
|
|
|
|
| 7 |
| NATURAL SOUND | STEREO RECEIVER |
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
| TUNING | PURE | CD DIRECT |
STANDBY/ON |
|
|
|
|
|
|
|
|
|
| DIRECT | AMP | |
|
|
|
|
|
|
|
|
|
| MEMORY | EDIT | FM/AM |
|
| A/B/C/D/E | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|
| INPUT | VOLUME |
| TUNING MODE | REC OUT/ZONE 2 |
| ||||||||||
PHONES | SPEAKERS |
| BASS |
| TREBLE |
| BALANCE |
| LOUDNESS |
|
|
| |
| A | B |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ∞ |
| 4 |
|
|
|
| 7 |
|
|
|
| 3 | 1, 6 | |
1Set to the “∞” position.
VOLUME | 16 |
20 | 12 |
28 | 8 |
40 | 4 |
60 | 2 |
∞0
2Turn the power on.
STANDBY/ON
POWER
3Select the desired input source by using the INPUT selector. (For video sources, turn the TV/monitor
ON.)
INPUT
VCR · | TUNER | CD | PHONO |
| VCR | TAPE / MD |
DVD
*The name of the selected input source position will appear on the display. (For “TUNER”, the tuning mode will appear on the display.)
*Note that selecting each input source position selects the source which is connected to the corresponding input terminals on the rear panel.
4Select the speakers to be used.
SPEAKERS
A B
A SPEAKER B
5Play the source. (For detailed information on the tuning operation, refer to page 13.)
6Adjust to the desired output level.
VOLUME | 16 |
|
|
20 | 12 |
|
|
28 | 8 | VOLUME | + |
|
| ||
40 |
| 4 |
|
60 | 2 |
|
|
∞0
7If desired, adjust the BASS, TREBLE, BALANCE and LOUDNESS controls, etc. (Refer to page 11.)
When you finish using this unit
Press the STANDBY/ON switch on the front panel or POWER key on the remote control transmitter again to turn this unit into the standby mode.
*If you use two speaker systems, press both the A and B switches.