Displays information about the current audio signal.
| Format | Audio format of the input signal |
|
|
|
|
| The number of source channels in the input signal |
| Channel | (front/surround/LFE) |
| For example, “5.1 (3/2/0.1)” means 5.1ch in total | |
|
| |
Input | (3 front channels, 2 surround channels, and LFE). | |
|
|
|
| Sampling | The number of samples per second of the input digital signal |
|
|
|
| Bitrate | The amount of data per second of the input bitstream signal |
|
|
|
| Dialogue | The dialogue normalization level of the input bitstream signal |
|
| |
Output | The speaker terminals from which signals are output | |
|
|
|
•Even when the unit is set to output bitstream signals directly, the signal may be converted depending on the specifications and settings of the playback device.
■Video SignalDisplays information about the current video signal.
HDMI Signal | Presence or absence of HDMI signal input/output | |
HDMI Resolution | Resolutions of input signal (analog or HDMI) and output signal (HDMI) | |
|
| |
Analog Resolution | Resolutions of input signal (analog) and signal output at the MONITOR OUT | |
jacks (analog) | ||
| ||
|
|
Displays information about the TVs connected to the HDMI OUT jacks. Use the cursor keys (q/w) to switch between “OUT1” and “OUT2”.
Interface | TV interface |
Video Resolution | Resolutions supported by the TV |
|
|
Displays the network information on the unit.
IP Address | IP address |
Subnet Mask | Subnet mask |
|
|
Default Gateway | The IP address of the default gateway |
|
|
DNS Server (P) | The IP address of the primary DNS server |
|
|
DNS Server (S) | The IP address of the secondary DNS server |
|
|
MAC Address | MAC address |
|
|
Network Name | Network name (the unit’s name on the network) (p.111) |
|
|
Status | The connection status of the NETWORK jack |
|
|
Displays the system information on the unit.
Remote ID | The unit’s remote control ID setting (p.120) | |
TV Format | The unit’s video signal type (p.120) | |
|
| |
Speaker Impedance | The speaker impedance setting of the unit (p.119) | |
|
| |
Tuner Freq. Step | (Asia and General models only) | |
The FM/AM tuning frequency setting of the unit (p.120) | ||
| ||
|
| |
System ID | System ID number | |
|
| |
Firmware Version | The version of firmware installed on the unit | |
|
|
•If the unit detects a newer firmware over the network, “!” (exclamation mark) appears at the upper right of the “Information” and “System” icons, and the corresponding message will be displayed in this screen. You can update the unit’s firmware by pressing ENTER in this screen and following the procedure in “Updating the unit’s firmware via the network” (p.128).
■Multi ZoneDisplays information about Zone2.
Input | The input source selected for Zone2 |
Volume | The volume for Zone2 |
|
|
CONFIGURATIONS ➤ Viewing information about the unit (Information menu) | En 118 |
|
|